China Factory wholesale Label Applicator Machine - Tin Can Label Pasting Machine – Higee factory and suppliers

Factory wholesale Label Applicator Machine - Tin Can Label Pasting Machine – Higee

Short Description:

Product Detail

Product Tags

Feedback (2)

We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for Can Filler, Sealer Packing, Water Bottle Packing Machine, How about to start your good organization with our corporation? We are all set, properly trained and fulfilled with pride. Let’s start our new business enterprise with new wave.

Factory wholesale Label Applicator Machine - Tin Can Label Pasting Machine – Higee Detail:

2-1
Horizontal Cold Glue Labeling Machine

Description

This is automatic tin can labeling machine , this machine is suitable for metal tin cans such as paste food tin can, canned fruit tin, beef food tin, cat food can etc.

Machine layout

Features

1.This machine is used for metal tin labeling. The tin rolled into the machine, by the pressure in the tin rolling on the belt drive, when the tin pass through the hot melt adhesive points, can be coated with a hot melt adhesive, along with the moving of tin, the tin part with glue will press the front of the label and stick the label on, and began to be rolled in on the tin. At the same time, the label end was glued by gluing mechanism. With the tin moving on, the label has been affixed to the tin on a roll. Then get out of the machine driven by rolling belt.

2.This machine has alternately label supply mechanism, no need to stop the machine when add label.

3.The end glue supply is controlled by tin. It will not supply glue if without tin.

4.Machines using frequency control can be adjusted according to production requirement.

5.The machine is only to change a few parts for replacing different size tin, the label adhesive only in two ends, with less glue and low cost.

Parameters

Labeling capacity	200-400 tins / min
The diameter of tin	Φ50mm-114mm
The height of tin	30mm-240mm
The length of label	160mm-370mm
The width of label	25-236 mm
Power	380V 50HZ 3 phases, 2.62KW
Compressed air	2-4Kg/cm², 10L/ min
Machine size	1855mm × 750mm × 1250mm
Weight	650Kg

Labels

The labels usually are paper label in pieces, not in roll. It should be full wrapped of the tin can.

Conveyor and connecting parts

Conveyor 1	Width:607mm 0.25KW
Turning table	D: 1000mm 0.37KW
Conveyor 2	Width:82mm 0.37KW
Can turner	To turn the direction of the can
Conveyor 3	Width:190mm 0.55KW

Product detail pictures:

Related Product Guide:
Cooperation

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Factory wholesale Label Applicator Machine - Tin Can Label Pasting Machine – Higee , The product will supply to all over the world, such as: Bogota, Montreal, Leicester, We'll supply much better products with diversified designs and expert services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.

Cheap Label Maker