Non-carbonated Beverage Filling Machine Line

Short Description:

Our Non-carbonated beverage drinks filling machine line integrates bottle rinsing, filling and capping machine into one monobloc machine. The three processes are carried out fully automatically. Filling in PET bottle or glass bottle or can bottle all can be customized.


  • Supply Ability: 20 Sets/Month
  • Trade term: FOB, CNF, CIF, EXW
  • Port: Shanghai port in China
  • Payment term: TT, L/C
  • Production lead time: Normally 60 days, it should be reconfirmed.
  • Trade term: FOB, CNF, CIF, EXW
  • Port: Shanghai port in China
  • Payment term: TT, L/C
  • Production lead time: Normally 30-45 days, it should be reconfirmed.
  • Product Detail

    Product Tags

    soft drink filling line

    Non Carbonated Beverage Filling Machine 3 in 1 Monobloc Production Line

    Features:
    The machine elements that contact with the liquid is made of high quality stainless steel, The critical components are made by numerically-controlled machine tool, and the whole machine condition is under detection by photoelectric sensor. It is with advantages of high automation, easy operation, good abrasive resistance, high stability, low failure rate, etc.
    We can also equip the beverage production line with water treatment equipment, pre-treatment mixer equipment system, and the packing system including shrink sleeve labeling machine, shrink packing machine etc.as one complete line.

    General descriptions:
    The bottle enters into the rinsing part of three-in-one machine through air conveyor. The gripper installed on the rotary disk catches bottle and turns it over 180 degrees and makes the bottleneck face ground. In the special rinsing area, the nozzle on the gripper sprays water to rinse bottle in wall. After rinsing and draining, the bottle turns over 180 degrees along the guide rail and make the bottleneck faces sky. Then rinsed bottle is transferred to the filling part through poking bottle starwheel. The bottle that enters into the filler is hold by neck holding plate. The filling valve acted by the cam can realize up and down. It adopts pressure filling way. The filling valve opens and begins filling when it moves down and touches the bottleneck, the filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the capping part through hold neck transition poking wheel. The stop screwing knife holds the bottleneck, keeps bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, discharging through the action of the cam. The full bottle is transferred to bottle outlet conveyor to the next process through starwheel. The whole machine is enclosed with windows, the height of enclosed window is higher than the peak of the 3 in 1 machine, in the bottom of the enclosed window has return air outlet

    Parameters:

    Model CGF 8-8-3 CGF 16-12-6 CGF 16-16-6 CGF 18-18-6 CGF 24-24-6 BYQ 16-16-5 BYQ 24-24-6 BYQ 32-320-8 BYQ 40-40-10
    Capacity
    0.5L/bottle/h
    2000 3000-4500 4000-6000 6000-8000 8000-10000 13000-15000 8000-8700 13200-15000 15000-18000
    Suitable bottle:

     PET Circular or square bottle

    Bottle diameter:

     50-115 mm

    Bottle height:

    150-340 mm

    Compressedair pressure:

     0.3-0.7 Mpa

    Washing way:

     Gravity water

    Washing water's pressure :

     >0.06Mpa <=0.2Mpa

    Total power 2 2.2 2.5 3 4 2.2 3 4 7.5
    Weight <kg> 2000 3000 4000 4500 6500 3000 4000 4500 6500

     

    Model BYQ 50-50-15 BYQ 60-60-15 BYQ 72-72-18 BYQ 80-80-22 SYD 24-24-6 SYD40-40-12
    Capacity 0.5L/bottle/h 22000-24000 28000-30000 30000-36000 40000-42000 10000-12000 13000-15000
    Suitable bottle:

     PET bottle/ Circular or square bottle

    Bottle diameter:

     50-115 mm

    Bottle height:

    160-340 mm

    Compressed air pressure:

     0.3-0.7 Mpa

    Washing mdeium:

     Aseptic water

    Washing water's pressure:

     >0.06Mpa <=0.2Mpa

    Total power 8.5 11 15 19 4.5 7.5
    Weight <kg> 7500 8500 9500 10000 5000 8500

    non-carbonated drink filler

    1. Air conveyor
    air conveyor

    2.Non-carbonated beverage filling machine (Washing/filling/capping 3-in-1 Monoblock)
    3 in 1 non-carbonated drink filler
    Rinsing part:
    ●  Except the down framework, the transmission parts and some parts that must be made of special materials. Other spare parts are made of stainless steel 304.
    ●  The roller bearing is made of stainless steel, the sealing ring is made of EPDM material, and plastic is made of UMPE.
    ●  The gripper is made of stainless steel, the position where hold the bottleneck is also made of stainless steel, compared with the traditional rubber gripper, it is much hygiene, durable, and no quick-wear parts, the screw parts of the bottleneck can avoid being polluted by the rubber gripper.
    ●  The gripper equipped with high-efficient spray nozzle, it can develop to any position of inwall of the bottle, and can save rinsing water. There is a cover above the spray nozzle which can prevent water spilling; and there are regulatory recycle slot and recycle pipes under the nozzles.
    ●  Rinsing time can be guaranteed for 2 seconds.
    ●  By adjusting the height of the rotary parts to adapt for different bottle height
    ●  The motivation is derived from the driven system in the framework passed by gear.
    ●  The supplying of rinsing water is controlled by solenoid valve.

    Filling part:
    ●  Adopted famous brand anti-corrosion non-maintaining bearing that can reduce the pollution of filling to the environment.
    ●  The rotate plate is made of stainless steel 304, large flat toothed bearing.
    ●  The pressure mechanical valve is introduced the advanced foreign design with a fast filling speed, no hygiene corner pocket, a few sealing parts, and precise liquid level control. The whole valve is made of food grade stainless steel.
    ●  The filling valve opens and begins filling when it moves down and touches the bottleneck, the filling valve move up and leave the bottleneck when it finishes filling.
    ●  The beverage supply adopts the automatic pneumatic valve magnetic liquid-level switch to control the liquid tank automatically.
    ●  Sliding bearing is adopted non-maintaining bearing, that can reduce the pollution of filling to the environment. Rolling bearing made of stainless steel, the sealing ring is made of EPDM material, plastics is made of UMPE.
    ●  The motivation of the filler is derived from the driven system in the framework and passed by gear.
    ●  The main drive adopts gear drive, with high efficiency, low noise, long life, easy maintenance, sufficient lubrication, grease can lubricate centralizing automatically, adopts transducer to the speed of main motor to control, the machine adopts step-less frequency conversion timing. The material for the whole platform and frame is carbon steel with stainless steel outside.
    ●  The machine is automatically controlled by PLC, fault on line display, like bottle block, cap shortage etc.
    ●  The key parts and electric elements of the machine are adopting import products.

    Capplling part:
    This unit is the highest degree of accuracy of 3-in-1 machine, it is important for the machine to run stably and the product quality.
    ●  Screwing capping head (the main parts which can assure the capping quality), the expert improve the design of magnetic steel, this improvement can reduce the defective rate of capping better and the traditional character of easy to set and adjust the torque of screwing capping head.
    ●  The screwing capping head is dual-purpose design: it is suitable for flat cap and sport cap.
    ●  The device which can take out the reverse cap and prevent the reverse cap passing is settled in the cap-falling guide.
    ●  A group of photoelectric switches are settled on cap-falling guide. The machine will stop when there is no cap on the guide.
    ●  A bottle inlet detect switch is settled on the screwing capper.
    ●  There are aseptic nozzles between the transition poking wheel and filling parts to rinse the product rested in the bottleneck screw parts.
    ●  There is a cap-lock cylinder in the joint between the cap-falling guide and poking cap plate. It is realize that no feeding no cap.
    ●  By adjusting the height of the rotary parts to adapt for different bottle height.
    ●  The motivation of the screwing capper is derived from the driven system in the framework and passed by gear.
    ●  The main parts of the screwing capper are processed by the digital-control processing center

    4. Belt conveyor
    belt conveyor

    Washing Part
    soft drink filling line

    Filling Part
    soft drink filling line

    Capping Part
    soft drink filling line

    3.Cap Loader

    belt conveyor

    Cap loader conveys the caps to the cap unscrambling machine.

    It has the function of no bottle no cap loading, automatic control.

    There is a detector switch in the cap sorter, when the cap is not enough, the detector on the cap sorter get a signal of lacking-cap, the cap elevator starts. The caps in the tank pass through the belt conveyor to the cap sorter. It can change the size of the tank inlet by the flashboard; this can adjust the speed of cap falling.


  • Previous:
  • Next:

  • Leave Your Message

    Write your message here and send it to us

    Leave Your Message

    Write your message here and send it to us